Output Plugs and Connectors
When purchasing AC-DC linear and switching power supplies, you must specify the output plug and connectors specification. This article will for help determining the units that you need.
| Item Code | Item Type |
Description | Image |
|---|---|---|---|
| .725 | Output Plug | 0.7 X 2.5 X 10MM (EIAJ-1) |  |
| .725-HP | Output Plug | O.7 X 2.5 X 10MM (HARD PLASTIC EIAJ-1) |  |
| .932 | Output Plug | 0.9 X 3.2 X 9.0MM |  |
| 100 | Output Plug | 1.0 X 3.8 X 9.5MM |  |
| 100-8MM MOLDED | Output Plug | 1.0 X 3.8 x 8MM |  |
| 101 | Output Plug | 1.1 X 3.0 X 9.0MM |  |
| 101 RA MOLDED | Output Plug | 1.1 X 3.0 X 9.5MM RIGHT ANGLE MOLDED (11MM STANDARD MOLD) |  |
| 101A-HP | Output Plug | 1.1 X 3.5 X 9.0MM (HARD PLASTIC) |  |
| 103 | Output Plug | 1.3 X 3.5 X 9.5MM |  |
| 103 RA MOLDED | Output Plug | 1.3 X 3.5 X 11MM RIGHT ANGLE (MOLD LENGTH OPTIONAL-STANDARD MOLD 11MM |  |
| 103D MOLDED WITH DETENT | Output Plug | 1.3 X 3.5 x 9.5MM |  |
| 103D WITH DETENT | Output Plug | 1.3 X 3.5 X 9.5MM (OCTANGLE WITH DETENT) |  |
| 103D-HP | Output Plug | 1.3 X 3.5 X 9.5MM (HARD PLASTIC WITH DETENT) |  |
| 103RA ASSEMBLY | Output Plug | 1.3 X 3.5 X 9.5MM RIGHT ANGLE ASSEMBLY PLUG |  |
| 107 | Output Plug | 1.7 X 4.0 X 9.5MM (EIAJ-2) |  |
| 107-HP | Output Plug | 1.7 X 4.0 X 9.5MM (HARD PLASTIC) |  |
| 107A | Output Plug | 1.7 X 4.75 X 9.5 MM (EIAJ-3) |  |
| 107A MOLDED | Output Plug | 1.7 X 4.75 X 14MM |  |
| 107A-HP | Output Plug | 1.7 X 4.75 X 9.5MM (HARD PLASTIC) |  |
| 107A-RA | Output Plug | 1.7 X 4.75 X 8.5MM RIGHT ANGLE |  |
| 108 (EIAJ 4) | Output Plug | 1.0MM PIN X 3.3 (ID) X 5.5 (OD) |  |
| 108-RA MOLDED (EIAJ-4) | Output Plug | EIAJ-4 PLUG PIN SIZE 1.0MM (5.5MM OD x 3.3MM ID) |  |
| 109 MOLDED (EIAJ-5) | Output Plug | EIAJ-5 PLUG PIN SIZE 1.4MM (6.5MM OD x 4.3MM ID) |  |
| 109 (EIAJ 5) | Output Plug | 1.4 X 4.3 X 6.5MM |  |
| 201 | Output Plug | 2.5MM MALE DIAMETER x 11MM LENGTH |  |
| 201 MOLDED | Output Plug | 2.5MM DIAMETER X 11MM LENGTH (11MM STANDARD MOLD) |  |
| 202 | Output Plug | 3.5MM MALE x 14MM LENGTH |  |
| 202 MOLDED | Output Plug | 3.5 X 14MM (14MM STANDARD MOLD) |  |
| 202RA | Output Plug | 3.5MM MALE RIGHT ANGLE x 14MM LENGTH |  |
| 202STER | Output Plug | 3.5MM MALE STEREO |  |
| 205 | Output Plug | 2.1 X 5.5 X 9.5MM |  |
| 205 MOLDED | Output Plug | 2.1 x 5.5 x 11MM (STANDARD MOLD 11MM) |  |
| 205 MOLDED WITH DETENT | Output Plug | 2.1 X 5.5 X 9.5MM |  |
| 205 RA MOLDED 18AWG | Output Plug | 2.1 X 5.5 X 11MM RIGHT ANGLE 18AWG |  |
| 205 RA MOLDED 22AWG | Output Plug | 2.1 X 5.5 X 11MM RIGHT ANGLE 22AWG |  |
| 205-HP HARD PLASTIC SHELL | Output Plug | 2.1 X 5.5 X 9.5MM (9.5MM ROUND HARD PLASTIC) |  |
| 205A | Output Plug | 2.1 X 5.5 X 14MM |  |
| 205A MOLDED | Output Plug | 2.1 X 5.5 X 14MM |  |
| 205RA-14MM ASSEMBLY | Output Plug | 2.1 X 5.5 X 14MM RIGHT ANGLE ASSEMBLY PLUG |  |
| 205RA-9.5MM ASSEMBLY | Output Plug | 2.1 X 5.5 X 9.5MM RIGHT ANGLE ASSEMBLY PLUG |  |
| 206 | Output Plug | 2.5 X 5.5 X 9.5MM |  |
| 206 D MOLDED | Output Plug | 2.5 x 5.5 x 9.5MM INSULATED PLUG TIP W/ INNER SPRING CONTACT AND DETENT |  |
| 206 MOLDED | Output Plug | 2.5 x 5.5 x 11MM (STANDARD MOLD 11MM) |  |
| 206 RA MOLDED 18AWG | Output Plug | 2.5 X 5.5 X 11MM RIGHT ANGLE 18AWG |  |
| 206 RA MOLDED 22AWG | Output Plug | 2.5 X 5.5 X 11MM RIGHT ANGLE 22AWG |  |
| 206-HP HARD PLASTIC SHELL | Output Plug | 2.5 X 5.5 X 9MM (9MM ROUND HARD PLASTIC) |  |
| 206A | Output Plug | 2.5 X 5.5 X 14MM |  |
| 206A MOLDED | Output Plug | 2.5 X 5.5 X 14MM DC PLUG MOLDED W/ DETENT |  |
| 206RA-14MM ASSEMBLY | Output Plug | 2.5 X 5.5 X 14MM RIGHT ANGLE ASSEMBLY PLUG |  |
| 206RA-9.5MM ASSEMBLY | Output Plug | 2.5 X 5.5 X 9.5MM RIGHT ANGLE ASSEMBLY PLUG |  |
| 209 | Output Plug | 3.1 X 6.3 X 9.5MM |  |
| 212 | Output Plug | 3 CONDUCTOR – AVAILABLE WITH MOLD |  |
| 851 | Output Plug | 2.5MM MALE DIAMETER x 11MM LENGTH WITH COUPLING RING |  |
| 860 | Output Plug | 1.3 X 3.5 x 9.5MM |  |
For
AC-DC units, to determine output plug polarity refer to the following diagram
that corresponds to the diagram on the label of the power supply:
fig. 1
fig. 2
fig. 3
fig. 4
Figures 1 and 2 represent an output plug with inside positive polarity (IP;
for barrel-type plugs) or tip-positive polarity (TP; for pin-type plugs).
Figures 3 and 4 represent an output plug with inside negative polarity (IN;
for barrel-type plugs) or tip-negative polarity (TN; for pin-type plugs).
Did you enjoy this post? Why not leave a comment below and continue the conversation, or subscribe to my feed and get articles like this delivered automatically to your feed reader.
Comments
No comments yet.
Leave a comment